Explore

The Grundfos Hydro MPC-S for straightforward control

The Hydro MPC-S pressure booster maintains constant pressure in a building through cutting-in and cutting-out pumps as required, ensuring you get straightforward control of your booster set. The operating range of the pumps stays between two pressure points – the Set pressure and Cut-out pressure. Pump changeover is automatic and depends on load, operating hours and operating conditions.

Reduced energy consumption

Proportional-pressure mode adapts to the actual pressure required to optimise energy efficiency and achieve water and energy savings.

Multi-sensor function

The system optimises performance by changing the setpoint according to the measured values from up to six sensors installed in the system.

Smooth operation

With the Hydro MPC, it is possible to install an external primary sensor. In case of a cable break or sensor failure, the secondary sensor takes over to make sure that the system runs smoothly.

Smooth start-up

Soft pressure build-up ensures a smooth start-up of the system. Empty pipes are slowly filled with water to minimise the risks of water hammer, leaks and flooding, thus reducing maintainance costs.

Cambodian water plant enjoys 15% energy and water savings

In the Cambodian province of Takéo, the water supply company was doing what it could with the technology it had to supply drinking water to the small city of Doun Kaev and the surrounding 45 villages of about 44,000 people.

Dubai buildings unlock up to 80% energy savings with simple pump swaps

A Dubai building owner is saving 50-80% electricity from the pumps in its air-conditioning systems. With a retrofit, the customer got new, state-of-the-art pump equipment and is providing a better environment to residents. The project is in line with Dubai’s goal of saving 30% of its energy by retrofitting 30,000 buildings by 2030. It all starts with a Grundfos Energy Check.

Easy access to safe, affordable water changes lives in Ugandan villages

After decades of unsafe water access causing sickness and death, fishing villages by Lake Victoria are now getting safe and affordable water with Grundfos Lifelink systems. In one village, diarrhoea cases are on the way to total eradication.

How an old treatment plant became one of Poland's best

Tomaszów updated its wastewater plant with a full-line supply of Grundfos pumps, mixers, optimised tank design and project execution. The city saved 50% energy and improved its water output to be among the best in Poland.

Luxury hotel cuts energy in half and keeps comfort at 100%

In 2010, Midea renovated its headquarters in Shunde, China. The company used another brand of pumps. By 2011, high electricity costs, high noise and other problems from those pumps encouraged the owners to look for a better solution.

Ningbo doses safely and accurately for 1.5 million citizens

Raised on a hillside in the mountains near this urban area of about 4 million in Zhejiang province, the Ningbo Dongqian Lake water plant would supply water to about a third of the city's population.

84 - Adding value in HVAC applications

In this course, you can learn about how you add value in HVAC systems for commercial buildings. We will look at how hydronic systems reduce energy consumption, how integrated solutions and modularised systems improve building performance, and how distributed pumping optimises HVAC system installation.

Additional Circulator Knowledge

Get a greater insight into circulator pumps. This topic on circulator pumps is designed to further boost your knowledge of circulators, providing you with concise information on how to replace an old circulator, as well as how to assemble an ALPHA plug.

Air Conditioning

This course offers two perspectives on air conditioning: 1) How to choose the right control mode and 2) Affordability and flexibility of different systems.

The ALPHA2 circulator pump and easy balancing with the GO Balance app | ...

This course provides an introduction to the ALPHA2 features and benefits and its many available control modes with a special focus on the efficient and easy balancing of heating systems in one-family homes.

An extended look at Building Information Modeling (BIM)

This course will take you further into the world of BIM, offering a thorough insight into schedule templates and data standards. You’ll also learn about different LOD definitions and what they mean for the information of model elements.

33 - An Introduction to Digital Dosing

This ECADEMY course introduces you to digital dosing and how it is applied in various applications. You'll also get an introduction to FlowControl Measurement and how it optimises digital dosing.

Data-light BIM assets

Data-heavy files with a lot of detailed information decrease workflow speed. Grundfos offers the resolution that suits your needs and preferences.

Solutions for buildings

The world’s increasing urbanisation is contributing to significant amounts of energy being used. The global cooling demand alone has doubled in less than 20 years. And water and energy go hand in hand. In general water pumps currently account for a huge amount of the world’s electricity consumption — but with more energy efficient pump solutions, this amount can be heavily reduced.

Solutions for industries

Despite rising demands for water and energy, we’re continuing to contaminate or waste our available resources. The availability of the world’s scarce water resources is increasingly limited due to the pollution of freshwater resources caused by the disposal of large quantities of insufficiently treated, or untreated, wastewater into rivers, lakes, aquifers and coastal waters. A total of 80% of all wastewater returns to nature without being properly treated.

Solutions for cities

Worldwide, cities are rapidly expanding — by 2030, 60% of the population is expected to live in urban environments — and the demand for safe and clean water is only growing.

Get the engineering manual for Boilers and Systems

Cavitation is the main reason for pump system breakdowns – and the high temperatures in steam boiler systems increase the risk of it occurring. Avoiding cavitation requires considerations of the pressure available at the inlet of the pump in order to make sure that NPSHA > NPSHR.

Get the engineering manual: Heating in Commercial Buildings

Increasing demands for energy efficient heating solutions needs a broad perspective to fully understand how a building is heated and the impact of air-based versus hydronic systems. Download the engineering manual and learn more.