Question 1 of 6
Basic

What does the FLOWADAPT control mode reduce the need for?

Question 2 of 6
Basic

Is it possible to set up MAGNA3 solely via the pump display?

Question 3 of 6
Basic

What is the FLOWADAPT control mode?

Question 4 of 6
Basic

When do you use the constant flow control mode?

Question 5 of 6
Basic

Which position must the MAGNA3 pump head always be in?

Question 6 of 6
Basic

What does the Grundfos eye at the top of the pump display?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 60 - The MAGNA3 Circulator Pump Course
Sorry. You did not pass the 60 - The MAGNA3 Circulator Pump Course test this time
Achieved badges:
How would you rate this course?
1: What does the FLOWADAPT control mode reduce the need for?
It reduces the need for pump throttling valves
1: What does the FLOWADAPT control mode reduce the need for?
It reduces the need for manual balancing
You can find the answer here >
1: What does the FLOWADAPT control mode reduce the need for?
It reduces the need for maintenance
You can find the answer here >
2: Is it possible to set up MAGNA3 solely via the pump display?
Yes
2: Is it possible to set up MAGNA3 solely via the pump display?
No
You can find the answer here >
3: What is the FLOWADAPT control mode?
A control mode in which the pump continuously adapts its performance to varying flow and performance demands
You can find the answer here >
3: What is the FLOWADAPT control mode?
A combination of the AUTOADAPT control mode and the flowlimit control function
3: What is the FLOWADAPT control mode?
A control mode in which the pump automatically sets a proportional pressure curve with a setpoint of 55%
You can find the answer here >
4: When do you use the constant flow control mode?
In systems that demand constant flow independent of pressure losses
4: When do you use the constant flow control mode?
In commercial buildings and small family homes
You can find the answer here >
4: When do you use the constant flow control mode?
Nowhere - it's a made-up control mode
You can find the answer here >
5: Which position must the MAGNA3 pump head always be in?
The 3 o clock position
5: Which position must the MAGNA3 pump head always be in?
The 6 o clock position
You can find the answer here >
5: Which position must the MAGNA3 pump head always be in?
The 9 o clock position
You can find the answer here >
6: What does the Grundfos eye at the top of the pump display?
The status of the pump
6: What does the Grundfos eye at the top of the pump display?
The direction of the water flow
You can find the answer here >
6: What does the Grundfos eye at the top of the pump display?
Nothing
You can find the answer here >