An additional toilet or a complete bathroom in an attic or basement? This should no longer be a wish. SOLOLIFT2 makes it happen, wherever the draining of a sanitary appliance is required but no gravity drain pipe is available or possible.
SOLOLIFT2 is a unique range of compact lifting stations which collect wastewater of domestic sanitary appliances and pump the wastewater through a thin pipe to the next collecting pipe with downward slope.
SOLOLIFT2 has been engineered according to the needs of professionals – having high reliability and easy maintenance in mind. It is the most service-friendly domestic macerator on the market. Its integrated lift-out pump unit enables fast and clean maintenance and repair.
SOLOLIFT2 collect wastewater of domestic sanitary appliances and pump the wastewater through a thin pressure pipe to the next pipe with downward slope, – up to a height of 6 meters or 100 meters in distance.
The product line includes five models of compact lifting stations, covering all the needs of a family household:
... collects wastewater from a toilet and one further sanitary appliance.
... collects wastewater from a toilet and three further sanitary appliances.
... is the extra slim variant, designed to be integrated in front-wall installations. Connects to one toilet and three further sanitary appliances.
... designed to take grey wastewater from dish washers, basins, showers, bathtubs, etc.
... ultra-compact design, made for dewatering showers, sinks, showers, etc.
Features and benefits
- Highest reliability, thanks to a high performance cutter and motor
- Able to handle accidently flushed female articles
- Very compact design
- Fast, easy and clean maintenance – no need to remove the unit from installation
- All relevant service parts dry and clean accessible – not submerged in tank
- Pressure proof, welded tank system, leakage free in case of backwater
- Odour-free by venting valve with charcoal filter
- Hot water resistant up to 90 °C for 30 min.
- Low start levels enable modern, flat shower trays
- Height adjustable inlet connectors ease installation and replacement
- Ready to install solution
- all units are LGA, VDE, EMC and EAC approved
- Very compact design
- Powerful cutter and motor
- Fast, easy and clean maintenance
Information and Advice
Grundfos is a world-wide provider of pumps and related systems. We have a trained staff of service engineers who will be able to support you during the installation phase of the pump or solution. Grundfos supplies high-quality products, but to maintain a long life of the product or the system we have many years of experience in different kinds of installations and have achieved good practice in installation techniques.
We will be able to support you with the following:
- Information about the proper protection of our pumps
- Physical placement of the pump to maintain necessary service/repair
- Physical placement of the pump to maintain proper operation
- Correct cabling to fulfil the requirements of good practice and Electro Magnetic Compliance
Do not hesitate to contact your local Grundfos company to obtain full support for your new installation.
To achieve optimum performance and operating condition it is very important that the Product/System is set up and adjusted correctly from the start. The knowledge and experience of the Grundfos service technician, and the use of dedicated Grundfos service tools to adjust the performance of the pump, together guarantee that the greatest possible efficiency and fully correct operation of the equipment are both achieved. Commissioning of the pump is recommended for the following applications:
- If the pumps are controlled by a frequency converter
- If the pump system is operating in large systems, e.g. a building management system
- If the user wants to be trained in the proper operation of the pump
- If the pump must not be a missing link in an important production/application facility
- Where the setup is crucial for the Grundfos product to operate for its full planned life, e.g. in water treatment applications. In such cases commissioning is not only recommended but required
- Where safety is an issue e.g. disinfection system
The commissioning is performed in a step by step procedure, and a report of the settings of the pump is produced.
Do not hesitate to contact your local Grundfos company to arrange for the commissioning of your newly-installed Grundfos product.
Recommended spare parts
Even though the Grundfos strategy is to supply the best possible pump solutions to our customers, after a long period of operation there will be wear and tear to some of the components in certain situations. If short operating downtime is a requirement, or if the pump is installed in inaccessible areas where delivery of spare parts may take a long time, it is advisable to maintain a small stock of recommended spare parts on site. Do not hesitate to contact your local Grundfos company to obtain information about recommended spare parts or service kits for your Grundfos product.
Grundfos offers an efficiency analysis of your existing pump system, providing you with suggestions for increasing efficiency and thus for achieving cost savings over time.
Increase the efficiency of your existing system
Conducting an Efficiency Analysis of your existing pump system provides you with a basis for increasing efficiency, with cost savings over time. An Efficiency Analysis results in suggestions for doing this and will show how this will save you money.
Grundfos offers the following levels of analysis for assessing the efficiency of your pump system:
- Installed base checks
A minor evaluation is conducted based only on the data from the identification plate on the pump compared with the newer, more efficient technology and materials found in modern pumps.
- Pump efficiency quick check
Pressure and kWh consumption of the pump are measured. Flow is estimated on the basis of available pump data and the results of the measurements.
Some of the resulting suggestions for improving efficiency might include a speed control upgrade, a motor upgrade, differently dimensioned pipes, the installation of a controller, or perhaps an agreement for routine service.
Complete Pump Audit
The efficiency analysis offered by Grundfos makes up the first step in our Pump Audit, a diagnostics tool that we use to check whether the pump system is operating at the optimal energy consumption to guarantee that your costs are kept to an absolute minimum – now and in the future. See "Replacement analysis" to find out more about the Grundfos Pump Audit.
A Grundfos Service Agreement ensures efficient and uninterrupted operation of your pump system and gives you access to Grundfos Service Centres and authorised Service Partners worldwide, 24 hours a day.
Prevention is better and more cost-effective, than cure
Once you have purchased your pump, you will want it to function efficiently and reliably; a formal service agreement with Grundfos will give you peace of mind. It also makes sound economic sense, giving you a firm costing for your maintenance budget and access to substantial discounts.
You simply combine a range of service programmes to suit your needs – and then let us carry out scheduled maintenance visits to prevent downtime. We offer three types of service agreement, available for all pumps:
Whichever you choose, you will be serviced by specially trained staff at all times.
The cost effective choice
Well-maintained pumps can reduce your energy consumption by up to 50% and in a series of pumps working together one faulty pump can affect all the others. A Grundfos Service Agreement keeps your total cost of owning a pump at a minimum, because our careful consideration of the Life- Cycle Cost of all our products means that we have control over the real costs of ownership of our pumps.
Signing up for a service agreement and letting our highly-skilled service technicians service your pumps is a safeguard against unforeseen expenditure. Regular servicing and maintenance of your pumps will ensure that they operate with optimum efficiency.
Repair and maintenance
Grundfos Service will maintain and repair your pumps. Our service professionals can also advise you on efficiency issues, offering suggestions for saving money in the long term.
Repair and maintenance of your existing pumps system
Of course, you can always call Grundfos for repair and maintenance of pumps you have purchased from us. Grundfos can repair your pumps to the same specifications as new. However, it is important to remember that an upgrade or even a replacement pump can be cheaper than repair in the long term. See "Upgrades and Replacement" for how this makes good business sense.
Effective service – wherever you are
Grundfos Service is always close by. Together with our local authorised service partners, we offer worldwide service, and help from qualified pump professionals is never far away, whether you need immediate assistance or you are interested in hearing about your savings possibilities.
Grundfos Remote Management is a cost-effective, secure and reliable way to monitor and manage pump installations from an Internet PC at a very low cost.
Connecting pumps and people
With a secure and reliable remote management system, you can monitor and manage your pump systems from an Internet PC at a very low price.
Grundfos Remote Management is a cost-effective and straightforward system for monitoring and managing pump installations in commercial buildings and in water supply and wastewater systems. It reduces the need for onsite inspections, and in the event of an alarm or warning, the relevant people are notified directly.
Compared with mobile phone-based monitoring, the system offers a wider range of benefits and functionalities. For those who do not require remote process automation, Grundfos Remote Management is the ideal solution for monitoring and remote control, rather than traditional SCADA (Supervisory Control and Data Acquisition) systems. Initial investment is minimal, and a fixed low fee covers data traffic, hosting costs and system support, including back-up of all data.
Efficient alarm management
Via its on-call schedule, this new telemetry system ensures that alarms from onsite controllers go directly to the relevant people. From a PC anywhere, the system manager can log on and plan who is to receive alarm messages from each installation at any given time of the day. Managers can plan years ahead and easily handle daily exceptions to the schedule.
Optimise service and maintenance
Changes in pump performance can be tracked using trend graphs automatically generated by the system. This can give an indication of wear or damage in the installation, and service and maintenance can be planned accordingly.
The communication interface (the CIU271 modem) enables data transmission via GPRS/SMS from your Grundfos pumps and controllers. The built-in multi-purpose I/O board allows you to connect sensors and switches
Grundfos Pump Audit is our replacement analysis and is a complete diagnostic tool, focusing on your facility, your system’s energy efficiency, your pumping solutions total Life-Cycle Costs, and detailed recommendations for replacement and pay-back time.
Let our Pump Audit tell you how to save on energy costs
The Grundfos Pump Audit is a comprehensive check up of your pump system. It measures flow, pressure, power absorbed, and overall efficiency of the pumps you have installed over a given period, and highlights how much energy you could save by switching to more efficient pumps and motors.
The process starts with the Pump Audit team visiting your facility and listening to your description of your requirements, with the aim of ensuring the best possible definition of the task ahead. The next step is a comprehensive on-site visual inspection of your facility. This includes inspection of the operating environment, pumps, valves and line drawings.
The purpose of CAPS is to provide a complete tool that contains both an extensive catalogue of Grundfos products and a sizing program to select the most suitable pump for your application.
On top of that there is a comprehensive pump replacement function for central heating circulating, hot water pumps and the wastewater S pumps and the possibility of producing professional quotations including curves, drawings, quotation texts, wiring diagrams etc.
Last but not least, the software contains the instruction and operating manuals for nearly all Grundfos pumps in multiple languages. Service drawings, exploded views and parts lists are available for all sewage products as well as several other pump types.
CAPS is available in two versions: WinCAPS is available on a CD-ROM and the online version called WebCAPS is available at the Grundfos website - www.grundfos.com. Additional features in WebCAPS include CAD Drawings and Literature.
BE Responsible is one of our key drivers in Grundfos. It is therefore essential to us, that our pumps are developed with a low energy consumption and the highest possible performance throughout their life. Therefore, Grundfos Service Offerings including spare parts and replacement kits are defined already in the development phase.
Customized service offerings, online ordering and rapid response distribution centres ensure you to have the parts when you need them.
Recommended spare parts list
The list specifies the parts you should have on site to service your pumps. These recommendations can be found at the product site in our WEB Caps tool.
Specially designed service kits
Service Kits include everything you need for a specific maintenance or repair task, including instructions for dismantling, replacement and reassembly.
24-hour Spare Part Delivery Service
To be extra sure you do not have to wait, we can set aside a stock of your operation critical spare parts. This will make them available for you, whenever you need them.
Spare parts for the Grundfos pump you buy today will still be available for 10 years - this is our guarantee to you.
Service online tool
From a PC anywhere you have 24-hour access to our online tool WebCaps. All the technical documentation and information you need to service your pumps is immediately available to you anytime:
- Service instructions
- Step-by-step service videos
- Interactive exploded views
- Sectional drawings
For this product a service video is available. The service video is an easy way to see how to disassemble and assemble the pump.
The WebCAPS literature and service sections offer quick and easy access to service videos.
From the WebCAPS opening window, the videos can be accessed in two different ways:
- via Service
- via Literature
The videos are also available on CD-ROM and DVD.
Select country to contact your local sales company
Select country to contact your local sales company