6 questions Intermediate

ECADEMY test

66 - Grundfos iSOLUTIONS MONITOR - Step by step assembling & mounting guide

This course test contains 6 questions and can be retaken at any time.

You must answer all questions correctly to pass the test and complete the course.

Start test

Question 1 of 6 Intermediate

Is it GiM compatible with other control panels or drives?

Question 5 of 6 Intermediate

What do you need to mount a GiM unit on a CR/CRE pump

Question 6 of 6 Intermediate

Happy with your answers?

Submit your current answers and get the final test result.

Submit

Test results

Congratulations. You have passed the test and completed the 66 - Grundfos iSOLUTIONS MONITOR - Step by step assembling & mounting guide

Achieved badges:

How would you rate this course?

You are welcome to add your rating of this course. Remember that you have to be logged in before you take the test to be able to give your rating.

Continue training Go to MyECADEMY

Sorry. You did not pass the 66 - Grundfos iSOLUTIONS MONITOR - Step by step assembling & mounting guide test this time

How would you rate this course?

You are welcome to add your rating of this course. Remember that you have to be logged in before you take the test to be able to give your rating.

Correct
Q: Is it GiM compatible with other control panels or drives?
A: Yes. You can connect it to a CUE drive for a better monitoring of the system.
Correct
Q: Where do you have to connect the VTU sensor cable in the pump?
A: The CR/CRE has a dedicated "filling/airvent" connection, where the VTU sensor should be mounted.
Correct
Q: Does Grundfos iSOLUTIONS Monitor require any specific or technical hability to commission?
A: No. I can easily comminssion the GiM unit via Grundfos GO, following the proper instructions and manuals.
Correct
Q: Does GiM unit work with all types of multistage CR/CRE pumps
A: Yes. You can mount the GiM unit on all models of CR and CRE
Correct
Q: What do you need to mount a GiM unit on a CR/CRE pump
A: One VTU sensor cable and a mounted bracket
Correct
Q: Can you connect additional sensors to the GiM unit?
A: Yes. The GiM unit is prepared for additional sensors that will allow for monitoring application and system performance.