Question 1 of 6
Basic

What is the first thing you should try if the toilet is clogged?

Question 2 of 6
Basic

The SOLOLIFT C-3 can handle solid particles up to…

Question 3 of 6
Basic

Can you increase the diameter of the discharge pipe with an adapter?

Question 4 of 6
Basic

How many minutes does it take to service a SOLOLIFT2 unit?

Question 5 of 6
Basic

What is the very first thing you have to do when installing a SOLOLIFT2?

Question 6 of 6
Basic

What is the main benefit of the 360-degree vertical and horizontal discharge and inlet access?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 61 - The SOLOLIFT2 Lifting Station Course
Sorry. You did not pass the 61 - The SOLOLIFT2 Lifting Station Course test this time
Achieved badges:
How would you rate this course?
1: What is the first thing you should try if the toilet is clogged?
You should remove water from the toilet bowl manually
You can find the answer here >
1: What is the first thing you should try if the toilet is clogged?
You should remove the pump-motor unit
You can find the answer here >
1: What is the first thing you should try if the toilet is clogged?
You should try the de-blocking function
2: The SOLOLIFT C-3 can handle solid particles up to…
10mm
You can find the answer here >
2: The SOLOLIFT C-3 can handle solid particles up to…
20mm
2: The SOLOLIFT C-3 can handle solid particles up to…
30mm
You can find the answer here >
3: Can you increase the diameter of the discharge pipe with an adapter?
Yes
You can find the answer here >
3: Can you increase the diameter of the discharge pipe with an adapter?
No
4: How many minutes does it take to service a SOLOLIFT2 unit?
3 minutes
4: How many minutes does it take to service a SOLOLIFT2 unit?
4 minutes
You can find the answer here >
4: How many minutes does it take to service a SOLOLIFT2 unit?
5 minutes
You can find the answer here >
5: What is the very first thing you have to do when installing a SOLOLIFT2?
You need to identify where the soil stack that you should connect to is located
5: What is the very first thing you have to do when installing a SOLOLIFT2?
You need to connect the wastepipe to the inlet
You can find the answer here >
5: What is the very first thing you have to do when installing a SOLOLIFT2?
You need to check that the floor is level and even
You can find the answer here >
6: What is the main benefit of the 360-degree vertical and horizontal discharge and inlet access?
It is easier to replace
You can find the answer here >
6: What is the main benefit of the 360-degree vertical and horizontal discharge and inlet access?
It is more energy-efficient
You can find the answer here >
6: What is the main benefit of the 360-degree vertical and horizontal discharge and inlet access?
It gives you maximum flexibility