Question 1 of 6
Basic

What need do domestic buildings have in common?

Question 2 of 6
Basic

What is the main job of a transfer pump

Question 3 of 6
Basic

What is the common characteristic of all domestic buildings?

Question 4 of 6
Basic

Where are transfer pumps often installed?

Question 5 of 6
Basic

What features do we recommend for a booster pump to be able to handle the air bubbles and dirt often found in shallow wells?

Question 6 of 6
Basic

Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 72 - The Domestic Water Pressure Boosting Course
Sorry. You did not pass the 72 - The Domestic Water Pressure Boosting Course test this time
Achieved badges:
How would you rate this course?
1: What need do domestic buildings have in common?
The need for reducing water pressure
You can find the answer here >
1: What need do domestic buildings have in common?
The need for a stable water pressure
1: What need do domestic buildings have in common?
The need for increasing water pressure
You can find the answer here >
2: What is the main job of a transfer pump
To create the necessary pressure and lift to move water from one place to another
2: What is the main job of a transfer pump
To ensure sufficient pressure in the taps
You can find the answer here >
2: What is the main job of a transfer pump
To discharge water from the domestic building
You can find the answer here >
3: What is the common characteristic of all domestic buildings?
They are more than 20 m2
You can find the answer here >
3: What is the common characteristic of all domestic buildings?
They are less than 400 m2
You can find the answer here >
3: What is the common characteristic of all domestic buildings?
They are homes
4: Where are transfer pumps often installed?
Inside
You can find the answer here >
4: Where are transfer pumps often installed?
Outside
4: Where are transfer pumps often installed?
Just under the roof
You can find the answer here >
5: What features do we recommend for a booster pump to be able to handle the air bubbles and dirt often found in shallow wells?
Good air-handling capabilities and an inlet filter
5: What features do we recommend for a booster pump to be able to handle the air bubbles and dirt often found in shallow wells?
Low noise level
You can find the answer here >
5: What features do we recommend for a booster pump to be able to handle the air bubbles and dirt often found in shallow wells?
A compact design
You can find the answer here >
6: Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?
Because it allows indoor installation protecting the pump from the harsh conditions outside
6: Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?
To avoid disturbing the neighbours
You can find the answer here >
6: Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?
It is required by law
You can find the answer here >