Question 1 of 6
Basic

Which mode is the default position in the performance mode selector?

Question 2 of 6
Basic

What is the default operation mode of SCALA1?

Question 3 of 6
Basic

What happens if there is a tiny leak in the system?

Question 4 of 6
Basic

What does it mean when the Grundfos Eye is static green?

Question 5 of 6
Basic

What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?

Question 6 of 6
Basic

What characterises the alternation type in a twin pump setup?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 79 - The SCALA1 Pressure Booster Course
Sorry. You did not pass the 79 - The SCALA1 Pressure Booster Course test this time
Achieved badges:
How would you rate this course?
1: Which mode is the default position in the performance mode selector?
Self-priming mode
1: Which mode is the default position in the performance mode selector?
Positive inlet mode
You can find the answer here >
1: Which mode is the default position in the performance mode selector?
Air-handling mode
You can find the answer here >
2: What is the default operation mode of SCALA1?
Duty/standby mode
2: What is the default operation mode of SCALA1?
Duty/assist mode
You can find the answer here >
2: What is the default operation mode of SCALA1?
Cascade mode
You can find the answer here >
3: What happens if there is a tiny leak in the system?
SCALA1 will proceed to start and stop operation periodically, indicating a cycling alarm after a period
3: What happens if there is a tiny leak in the system?
SCALA1 stops immediately and sends an alarm
You can find the answer here >
3: What happens if there is a tiny leak in the system?
Nothing
You can find the answer here >
4: What does it mean when the Grundfos Eye is static green?
It means that the power is on, but the motor is not running
4: What does it mean when the Grundfos Eye is static green?
It means that the power is on and the motor is running
You can find the answer here >
4: What does it mean when the Grundfos Eye is static green?
It means that the pump has been stopped
You can find the answer here >
5: What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?
Nothing
You can find the answer here >
5: What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?
It activates the dry-running protection alarm
5: What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?
It starts and stops in a fixed pattern for 30 minutes
You can find the answer here >
6: What characterises the alternation type in a twin pump setup?
It is when you select how you want the two SCALA1 pumps to switch
6: What characterises the alternation type in a twin pump setup?
It is when you select when you want the pumps to switch
You can find the answer here >
6: What characterises the alternation type in a twin pump setup?
It is when you select to solely run your pumps on an external input
You can find the answer here >