Question 1 of 4
Basic

What does it mean when the Grundfos Eye is static green?

Question 2 of 4
Basic

What happens if there is a tiny leak in the system?

Question 3 of 4
Basic

Can you fully set up a twin booster system consisting of two SCALA1 pumps without GO Remote?

Question 4 of 4
Basic

What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?

Question 4 of 4
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 79 - The SCALA1 Pressure Booster Course
Sorry. You did not pass the 79 - The SCALA1 Pressure Booster Course test this time
Achieved badges:
How would you rate this course?
1: What does it mean when the Grundfos Eye is static green?
It means that the power is on, but the motor is not running
1: What does it mean when the Grundfos Eye is static green?
It means that the power is on and the motor is running
You can find the answer here >
1: What does it mean when the Grundfos Eye is static green?
It means that the pump has been stopped
You can find the answer here >
2: What happens if there is a tiny leak in the system?
SCALA1 will proceed to start and stop operation periodically, indicating a cycling alarm after a period
2: What happens if there is a tiny leak in the system?
SCALA1 stops immediately and sends an alarm
You can find the answer here >
2: What happens if there is a tiny leak in the system?
Nothing
You can find the answer here >
3: Can you fully set up a twin booster system consisting of two SCALA1 pumps without GO Remote?
Yes
You can find the answer here >
3: Can you fully set up a twin booster system consisting of two SCALA1 pumps without GO Remote?
No
4: What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?
Nothing
You can find the answer here >
4: What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?
It activates the dry-running protection alarm
4: What happens if SCALA1 detects no pressure and no flow within five minutes of being connected to a power supply?
It starts and stops in a fixed pattern for 30 minutes
You can find the answer here >