1
How often does a feed valve require maintenance in a typical boiler system?
2
Which of these is a benefit of operating at the power limit?
4
What is the essential aspect of the ‘new mind-set’?
5
What is the estimated payback time when replacing fixed speed pumps with variable speed
6
What do Wash & Clean production facilities consider very important?
Test results
Congratulations. You have passed the test and completed the System optimisation in industrial applications
Achieved badges:
01.
Q: How often does a feed valve require maintenance in a typical boiler system?
A: At least once every 3 months
01.
Q: How often does a feed valve require maintenance in a typical boiler system?
A: At least once every 6 months
01.
Q: How often does a feed valve require maintenance in a typical boiler system?
A: At least once every 12 months
02.
Q: Which of these is a benefit of operating at the power limit?
A: Utilising all available pressure and power
02.
Q: Which of these is a benefit of operating at the power limit?
A: Cost-saving as you can reduce speed when necessary
02.
Q: Which of these is a benefit of operating at the power limit?
A: Preventing downtimes and reducing maintenance costs
03.
Q: What can you increase the speed to when applying a Grundfos CRE3 pump?
A: 4800 RPM
03.
Q: What can you increase the speed to when applying a Grundfos CRE3 pump?
A: 5500 RPM
03.
Q: What can you increase the speed to when applying a Grundfos CRE3 pump?
A: 5800 RPM
04.
Q: What is the essential aspect of the ‘new mind-set’?
A: Connecting the temperature sensor directly to the regulating valve
04.
Q: What is the essential aspect of the ‘new mind-set’?
A: Connecting the temperature sensor directly to the feed pipe
04.
Q: What is the essential aspect of the ‘new mind-set’?
A: Connecting the temperature sensor directly to the pump
05.
Q: What is the estimated payback time when replacing fixed speed pumps with variable speed
A: Two months
05.
Q: What is the estimated payback time when replacing fixed speed pumps with variable speed
A: Three months
05.
Q: What is the estimated payback time when replacing fixed speed pumps with variable speed
A: Four months
06.
Q: What do Wash & Clean production facilities consider very important?
A: That the pumps are compact
06.
Q: What do Wash & Clean production facilities consider very important?
A: That the pumps are energy-efficient
06.
Q: What do Wash & Clean production facilities consider very important?
A: Both of the above