Question 1 of 8
Advanced

What is the most efficient way to operate a water distribution system?

Question 2 of 8
Advanced

What is placed in critical pressure points of the distribution network to establish DDD?

Question 3 of 8
Advanced

How is a DMA created?

Question 4 of 8
Advanced

What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?

Question 5 of 8
Advanced

Grundfos Utility Analytics is what kind of solution?

Question 6 of 8
Advanced

What is unique about the algorithm used to manage pressure with DDD?

Question 7 of 8
Advanced

What is the general purpose of a water tower?

Question 8 of 8
Advanced

What does DMA stand for?

Question 8 of 8
Advanced

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 21 - Water Distribution
Sorry. You did not pass the 21 - Water Distribution test this time
Achieved badges:
How would you rate this course?
1: What is the most efficient way to operate a water distribution system?
Using a proportional pressure control system
1: What is the most efficient way to operate a water distribution system?
Using a fixed constant pressure setpoint
You can find the answer here >
1: What is the most efficient way to operate a water distribution system?
Using a pressure reducing valve
You can find the answer here >
2: What is placed in critical pressure points of the distribution network to establish DDD?
2: What is placed in critical pressure points of the distribution network to establish DDD?
Pressure-reducing valves
You can find the answer here >
2: What is placed in critical pressure points of the distribution network to establish DDD?
Sensor data-loggers
3: How is a DMA created?
By closing valves within the distribution pipe network to create a zone and installing flowmeters where valves are left open to register the volume of water supplied and removed from the DMA
3: How is a DMA created?
By leaving open a few valves within the distribution pipe network and installing consumer meters to register water supplied to the DMA
You can find the answer here >
3: How is a DMA created?
By closing valves within the distribution pipe network and installing flowmeters to register water supplied to the DMA
You can find the answer here >
4: What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?
A booster pump or pressure-reducing valve
4: What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?
An open valve or a pressure gauge
You can find the answer here >
4: What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?
5: Grundfos Utility Analytics is what kind of solution?
An intelligent pumping solution
You can find the answer here >
5: Grundfos Utility Analytics is what kind of solution?
A solution requiring new hardware to integrate into your system
You can find the answer here >
5: Grundfos Utility Analytics is what kind of solution?
A non-intrusive and cloud-based solution
6: What is unique about the algorithm used to manage pressure with DDD?
It is self-learning
6: What is unique about the algorithm used to manage pressure with DDD?
It determines the pressure setpoint
You can find the answer here >
6: What is unique about the algorithm used to manage pressure with DDD?
7: What is the general purpose of a water tower?
To keep the water in the distribution pipe network pressurised
7: What is the general purpose of a water tower?
To boost pressure in the distribution area
You can find the answer here >
7: What is the general purpose of a water tower?
To keep a volume of water for emergency use
You can find the answer here >
8: What does DMA stand for?
8: What does DMA stand for?
District Metering Area
8: What does DMA stand for?
Domestic Metering Area
You can find the answer here >