1
How can the MAGNA3 pump ensure optimum condensation?
2
What characterises a heating system’s life cycle costs?
3
What are the benefits of using the handheld controller Grundfos GO with the MAGNA3 in terms of balancing?
4
What is the added bonus of using a MAGNA3 pump?
5
What are the consequences of an unbalanced system?
6
What characterises the FLOWLIMIT technology?
Test results
01.
Q: How can the MAGNA3 pump ensure optimum condensation?
A: The FLOWLIMIT technology built into the MAGNA3 makes it possible to set a max flow and eliminate the potential overflow area to ensure that the return temperature stays below 57°C.
01.
Q: How can the MAGNA3 pump ensure optimum condensation?
A: The MAGNA3 pump features a built-in condensation functionality that can be activated with a single touch.
01.
Q: How can the MAGNA3 pump ensure optimum condensation?
A: The MAGNA3 pump can be set to maintain the exact required pressure.
02.
Q: What characterises a heating system’s life cycle costs?
A: The running costs are significantly higher than the initial investment. A ratio of 20:1 is not uncommon.
02.
Q: What characterises a heating system’s life cycle costs?
A: The initial investment is the most expensive part. The running costs account for maximum 1/3 of the life cycle costs.
02.
Q: What characterises a heating system’s life cycle costs?
A: The running costs and the initial investment are split 50/50.
03.
Q: What are the benefits of using the handheld controller Grundfos GO with the MAGNA3 in terms of balancing?
A: The FLOWLIMIT function can be accessed remotely via Grundfos GO and the flow limit can be set in no time to make commissioning easier than ever.
03.
Q: What are the benefits of using the handheld controller Grundfos GO with the MAGNA3 in terms of balancing?
A: The Grundfos GO display will tell you whether the balance is “OK” or “Needs setting”.
03.
Q: What are the benefits of using the handheld controller Grundfos GO with the MAGNA3 in terms of balancing?
A: The pressure can be changed remotely throughout the building in no time to adapt to current demand.
04.
Q: What is the added bonus of using a MAGNA3 pump?
A: Reliable condensation conditions increase system efficiency by 10% – which in turn means more cost-efficient operation, as also the amount of gas required is reduced thanks to the increase in efficiency.
04.
Q: What is the added bonus of using a MAGNA3 pump?
A: The MAGNA3 cuts energy consumption in condensation processes by at least 25%.
04.
Q: What is the added bonus of using a MAGNA3 pump?
A: Thanks to the FLOWLIMIT technology the gas required for the condensation process is more than halved.
05.
Q: What are the consequences of an unbalanced system?
A: An unbalanced system will add to the energy consumption and also affect the indoor climate of a building.
05.
Q: What are the consequences of an unbalanced system?
A: Part of the building will be ice cold because the hot water is unable to circulate.
05.
Q: What are the consequences of an unbalanced system?
A: The entire building will be heated unnecessarily as the system is unable to regulate itself.
06.
Q: What characterises the FLOWLIMIT technology?
A: The FLOWLIMIT technology makes it possible to set a max flow, which means that the design flow is never exceeded regardless of pipe diameter and pressure loss.
06.
Q: What characterises the FLOWLIMIT technology?
A: The FLOWLIMIT technology maintains a minimum flow at all times to use as little energy as possible.
06.
Q: What characterises the FLOWLIMIT technology?
A: The FLOWLIMIT technology lets the pump always run at full speed.