Question 1 of 6
Intermediate

Is SCALA2 fit for outdoor installation?

Question 2 of 6
Intermediate

What does the integrated sensor of the SCALA2 measure?

Question 3 of 6
Intermediate

How do you check the water pressure after installing the SCALA2?

Question 4 of 6
Intermediate

What value should you set SCALA2’s pre-charge pressure to?

Question 5 of 6
Intermediate

What is the main purpose of the SCALA2?

Question 6 of 6
Intermediate

Is SCALA2 able to boost water from a depth of below 6 metres?

Question 6 of 6
Intermediate

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 40 - SCALA2 water booster pump
Sorry. You did not pass the 40 - SCALA2 water booster pump test this time
Achieved badges:
How would you rate this course?
1: Is SCALA2 fit for outdoor installation?
Yes, but only in a rain-proof enclosure or under a pent roof
You can find the answer here >
1: Is SCALA2 fit for outdoor installation?
No, but you can install it in the basement
You can find the answer here >
1: Is SCALA2 fit for outdoor installation?
Yes, but it must be protected against frost
2: What does the integrated sensor of the SCALA2 measure?
The water pressure delivered by the city mains
You can find the answer here >
2: What does the integrated sensor of the SCALA2 measure?
The temperature of the water delivered to the taps
You can find the answer here >
2: What does the integrated sensor of the SCALA2 measure?
The water pressure delivered by the pump to the taps
3: How do you check the water pressure after installing the SCALA2?
Attach a water hose to the outside tap – if one is available – and see if the pressure is adequate
You can find the answer here >
3: How do you check the water pressure after installing the SCALA2?
Turn on the shower. If the home has two or more showers, then check the one furthest from the SCALA2
3: How do you check the water pressure after installing the SCALA2?
Turn on at least three taps, preferably on different floors
You can find the answer here >
4: What value should you set SCALA2’s pre-charge pressure to?
30% of the set point value / desired discharge pressure
You can find the answer here >
4: What value should you set SCALA2’s pre-charge pressure to?
50% of the set point value / desired discharge pressure
You can find the answer here >
4: What value should you set SCALA2’s pre-charge pressure to?
70% of the set point value / desired discharge pressure
5: What is the main purpose of the SCALA2?
To provide constant water pressure in all taps of a home
5: What is the main purpose of the SCALA2?
To increase the overall water pressure in the water distribution system of a home
You can find the answer here >
5: What is the main purpose of the SCALA2?
To provide hot water to all taps when needed in order to eliminate water waste
You can find the answer here >
6: Is SCALA2 able to boost water from a depth of below 6 metres?
Yes, the maximum depth is 8 m, but you might need to re-prime the pump
6: Is SCALA2 able to boost water from a depth of below 6 metres?
Yes, but you need to fill the suction line entirely
You can find the answer here >
6: Is SCALA2 able to boost water from a depth of below 6 metres?
No
You can find the answer here >