Question 1 of 4
Intermediate

What do the control modes in COMFORT pumps do?

Question 2 of 4
Intermediate

Where should the COMFORT TA pump and its external temperature sensor be installed?

Question 3 of 4
Intermediate

What are the two control modes available in the COMFORT TDT pumps?

Question 4 of 4
Intermediate

What is the purpose of a pump in a hot water recirculation system?

Question 4 of 4
Intermediate

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 62 - The COMFORT range for hot water recirculation systems
Sorry. You did not pass the 62 - The COMFORT range for hot water recirculation systems test this time
Achieved badges:
How would you rate this course?
1: What do the control modes in COMFORT pumps do?
They adjust the pump’s speed to match the actual hot‑water demand
You can find the answer here >
1: What do the control modes in COMFORT pumps do?
They optimise the hot water recirculation operation time
1: What do the control modes in COMFORT pumps do?
They serve both listed aims
You can find the answer here >
2: Where should the COMFORT TA pump and its external temperature sensor be installed?
The COMFORT TA pump must be installed on the return line, and the external temperature sensor must be installed on the return line next to the pump
You can find the answer here >
2: Where should the COMFORT TA pump and its external temperature sensor be installed?
The COMFORT TA pump must be installed on the supply line, and the external temperature sensor must be mounted on the return line
You can find the answer here >
2: Where should the COMFORT TA pump and its external temperature sensor be installed?
The COMFORT TA pump must be installed on the return line, and the external temperature sensor must be mounted on the supply line
3: What are the two control modes available in the COMFORT TDT pumps?
AUTOADAPT and Temperature control mode
You can find the answer here >
3: What are the two control modes available in the COMFORT TDT pumps?
Temperature control mode and Timer
3: What are the two control modes available in the COMFORT TDT pumps?
AUTOADAPT and Timer
You can find the answer here >
4: What is the purpose of a pump in a hot water recirculation system?
It creates sufficient water flow to compensate for heat loss in the pipeline
4: What is the purpose of a pump in a hot water recirculation system?
It helps a booster pump ensure sufficient water pressure in taps
You can find the answer here >
4: What is the purpose of a pump in a hot water recirculation system?
It performs both listed tasks above
You can find the answer here >