Question 1 of 6
Basic

What is the common characteristic of all domestic buildings?

Question 2 of 6
Basic

How can a booster pump for boosting water from a shallow well be installed?

Question 3 of 6
Basic

Where are transfer pumps often installed?

Question 4 of 6
Basic

What feature is necessary, if a booster pump is installed above a water storage tank with a negative inlet pressure?

Question 5 of 6
Basic

Why is the maximum pressure of a pump for boosting from a roof tank so important?

Question 6 of 6
Basic

Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 72 - The Domestic Water Pressure Boosting Course
Sorry. You did not pass the 72 - The Domestic Water Pressure Boosting Course test this time
Achieved badges:
How would you rate this course?
1: What is the common characteristic of all domestic buildings?
They are more than 20 m2
You can find the answer here >
1: What is the common characteristic of all domestic buildings?
They are less than 400 m2
You can find the answer here >
1: What is the common characteristic of all domestic buildings?
They are homes
2: How can a booster pump for boosting water from a shallow well be installed?
Submerged
You can find the answer here >
2: How can a booster pump for boosting water from a shallow well be installed?
Dry-installed
You can find the answer here >
2: How can a booster pump for boosting water from a shallow well be installed?
Submerged or dry-installed
3: Where are transfer pumps often installed?
Inside
You can find the answer here >
3: Where are transfer pumps often installed?
Outside
3: Where are transfer pumps often installed?
Just under the roof
You can find the answer here >
4: What feature is necessary, if a booster pump is installed above a water storage tank with a negative inlet pressure?
Dry-run protection
You can find the answer here >
4: What feature is necessary, if a booster pump is installed above a water storage tank with a negative inlet pressure?
Self-priming
4: What feature is necessary, if a booster pump is installed above a water storage tank with a negative inlet pressure?
Pressure stabiliser
You can find the answer here >
5: Why is the maximum pressure of a pump for boosting from a roof tank so important?
To ensure a sufficient pressure in the pipes
You can find the answer here >
5: Why is the maximum pressure of a pump for boosting from a roof tank so important?
To protect pipes and installations in the home
5: Why is the maximum pressure of a pump for boosting from a roof tank so important?
To prevent clogging
You can find the answer here >
6: Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?
Because it allows indoor installation protecting the pump from the harsh conditions outside
6: Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?
To avoid disturbing the neighbours
You can find the answer here >
6: Why is it a good idea to select a pump with a low noise level for boosting water from a roof tank?
It is required by law
You can find the answer here >