Question 1 of 8
Advanced

What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?

Question 2 of 8
Advanced

How much of the data available to a water utility is actively used?

Question 3 of 8
Advanced

What is the general purpose of a water tower?

Question 4 of 8
Advanced

What is placed in critical pressure points of the distribution network to establish Demand Distribution?

Question 5 of 8
Advanced

What is the most efficient way to operate a water distribution system?

Question 6 of 8
Advanced

What happens with the control valve if network pressure gets too low?

Question 7 of 8
Advanced

What can the Water Balance analytics quickly show you?

Question 8 of 8
Advanced

What does DMA stand for?

Question 8 of 8
Advanced

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 21 - Water Distribution
Sorry. You did not pass the 21 - Water Distribution test this time
Achieved badges:
How would you rate this course?
1: What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?
A booster pump or pressure-reducing valve
1: What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?
An open valve or a pressure gauge
You can find the answer here >
1: What must zones be equipped with in order to achieve a fixed constant pressure setpoint at the discharge?
2: How much of the data available to a water utility is actively used?
2: How much of the data available to a water utility is actively used?
An estimated 1%
2: How much of the data available to a water utility is actively used?
Very few water utilities can draw on data
You can find the answer here >
3: What is the general purpose of a water tower?
To keep the water in the distribution pipe network pressurised
3: What is the general purpose of a water tower?
To boost pressure in the distribution area
You can find the answer here >
3: What is the general purpose of a water tower?
To keep a volume of water for emergency use
You can find the answer here >
4: What is placed in critical pressure points of the distribution network to establish Demand Distribution?
4: What is placed in critical pressure points of the distribution network to establish Demand Distribution?
Pressure-reducing valves
You can find the answer here >
4: What is placed in critical pressure points of the distribution network to establish Demand Distribution?
Sensor data-loggers
5: What is the most efficient way to operate a water distribution system?
Using a proportional pressure control system
5: What is the most efficient way to operate a water distribution system?
Using a fixed constant pressure setpoint
You can find the answer here >
5: What is the most efficient way to operate a water distribution system?
Using a pressure reducing valve
You can find the answer here >
6: What happens with the control valve if network pressure gets too low?
The control valve will open to maintain the minimum network pressure
6: What happens with the control valve if network pressure gets too low?
The control valve will close, stopping water from entering the network
You can find the answer here >
6: What happens with the control valve if network pressure gets too low?
The control valve does not respond to network pressure
You can find the answer here >
7: What can the Water Balance analytics quickly show you?
Which zones have a higher NRW
7: What can the Water Balance analytics quickly show you?
The pressure differential at two points you wish to compare
You can find the answer here >
7: What can the Water Balance analytics quickly show you?
How much each consumer is billed for water
You can find the answer here >
8: What does DMA stand for?
8: What does DMA stand for?
District Metering Area
8: What does DMA stand for?
Domestic Metering Area
You can find the answer here >