Question 1 of 6
Intermediate

What is the main purpose of the SCALA2?

Question 2 of 6
Intermediate

What does the integrated sensor of the SCALA2 measure?

Question 3 of 6
Intermediate

What type of buildings is SCALA2 optimised for?

Question 4 of 6
Intermediate

Is SCALA2 able to boost water from a depth of below 6 metres?

Question 5 of 6
Intermediate

Is SCALA2 fit for outdoor installation?

Question 6 of 6
Intermediate

What value should you set SCALA2’s pre-charge pressure to?

Question 6 of 6
Intermediate

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 40 - SCALA2 water booster pump
Sorry. You did not pass the 40 - SCALA2 water booster pump test this time
Achieved badges:
How would you rate this course?
1: What is the main purpose of the SCALA2?
To provide constant water pressure in all taps of a home
1: What is the main purpose of the SCALA2?
To increase the overall water pressure in the water distribution system of a home
You can find the answer here >
1: What is the main purpose of the SCALA2?
To provide hot water to all taps when needed in order to eliminate water waste
You can find the answer here >
2: What does the integrated sensor of the SCALA2 measure?
The water pressure delivered by the city mains
You can find the answer here >
2: What does the integrated sensor of the SCALA2 measure?
The temperature of the water delivered to the taps
You can find the answer here >
2: What does the integrated sensor of the SCALA2 measure?
The water pressure delivered by the pump to the taps
3: What type of buildings is SCALA2 optimised for?
Industrial buildings with up to 3 floors and 8 taps
You can find the answer here >
3: What type of buildings is SCALA2 optimised for?
Commercial buildings with up to 3 floors and 8 taps
You can find the answer here >
3: What type of buildings is SCALA2 optimised for?
Residential buildings with up to 3 floors and 8 taps
4: Is SCALA2 able to boost water from a depth of below 6 metres?
Yes, the maximum depth is 8 m, but you might need to re-prime the pump
4: Is SCALA2 able to boost water from a depth of below 6 metres?
Yes, but you need to fill the suction line entirely
You can find the answer here >
4: Is SCALA2 able to boost water from a depth of below 6 metres?
No
You can find the answer here >
5: Is SCALA2 fit for outdoor installation?
Yes, but only in a rain-proof enclosure or under a pent roof
You can find the answer here >
5: Is SCALA2 fit for outdoor installation?
No, but you can install it in the basement
You can find the answer here >
5: Is SCALA2 fit for outdoor installation?
Yes, but it must be protected against frost
6: What value should you set SCALA2’s pre-charge pressure to?
30% of the set point value / desired discharge pressure
You can find the answer here >
6: What value should you set SCALA2’s pre-charge pressure to?
50% of the set point value / desired discharge pressure
You can find the answer here >
6: What value should you set SCALA2’s pre-charge pressure to?
70% of the set point value / desired discharge pressure