6 questions Basic

ECADEMY test

62 - The COMFORT Hot Water Recirculation Course

This course test contains 6 questions and can be retaken at any time.

You must answer all questions correctly to pass the test and complete the course.

Start test

Question 1 of 6 Basic

How far away from the discharge port of the hot water source should you place the sensor?

Question 2 of 6 Basic

On which pipe do you mount the pump?

Question 3 of 6 Basic

How high are the potential energy savings you can achieve with Comfort with AUTOADAPT?

Question 4 of 6 Basic

How many litres of clean water to a typical family of three pour down the drain every year?

Question 5 of 6 Basic

How many temperature sensors does Grundfos COMFORT with AUTOADAPT come with?

Question 6 of 6 Basic

Happy with your answers?

Submit your current answers and get the final test result.

Submit

Test results

Congratulations. You have passed the test and completed the 62 - The COMFORT Hot Water Recirculation Course

Achieved badges:

How would you rate this course?

You are welcome to add your rating of this course. Remember that you have to be logged in before you take the test to be able to give your rating.

Continue training Go to MyECADEMY

Sorry. You did not pass the 62 - The COMFORT Hot Water Recirculation Course test this time

How would you rate this course?

You are welcome to add your rating of this course. Remember that you have to be logged in before you take the test to be able to give your rating.

Correct
Q: How far away from the discharge port of the hot water source should you place the sensor?
A: Between 25 and 50 centimetres
Correct
Q: On which pipe do you mount the pump?
A: The return pipe
Correct
Q: How high are the potential energy savings you can achieve with Comfort with AUTOADAPT?
A: Approximately 48%
Correct
Q: How many litres of clean water to a typical family of three pour down the drain every year?
A: 16,000 litres
Correct
Q: How many temperature sensors does Grundfos COMFORT with AUTOADAPT come with?
A: 2
Correct
Q: What can you use the timer function for?
A: It allows you to customise the pump's operating periods