Question 1 of 6
Basic

How high are the potential energy savings you can achieve with Comfort with AUTOADAPT?

Question 2 of 6
Basic

How much electricity can be saved on average by using the AUTOADAPT operation mode?

Question 3 of 6
Basic

Which of these is NOT one of COMFORT with AUTOADAPT's three operation modes?

Question 4 of 6
Basic

What can you use the timer function for?

Question 5 of 6
Basic

How far away from the discharge port of the hot water source should you place the sensor?

Question 6 of 6
Basic

On which pipe do you mount the pump?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 62 - The COMFORT Hot Water Recirculation Course
Sorry. You did not pass the 62 - The COMFORT Hot Water Recirculation Course test this time
Achieved badges:
How would you rate this course?
1: How high are the potential energy savings you can achieve with Comfort with AUTOADAPT?
Approximately 43%
1: How high are the potential energy savings you can achieve with Comfort with AUTOADAPT?
Approximately 48%
1: How high are the potential energy savings you can achieve with Comfort with AUTOADAPT?
Approximately 52%
2: How much electricity can be saved on average by using the AUTOADAPT operation mode?
95%
2: How much electricity can be saved on average by using the AUTOADAPT operation mode?
96%
2: How much electricity can be saved on average by using the AUTOADAPT operation mode?
97%
3: Which of these is NOT one of COMFORT with AUTOADAPT's three operation modes?
100%
3: Which of these is NOT one of COMFORT with AUTOADAPT's three operation modes?
Temperature
3: Which of these is NOT one of COMFORT with AUTOADAPT's three operation modes?
Full Flow
4: What can you use the timer function for?
It enables you to receive alerts based on a customised schedule
4: What can you use the timer function for?
It allows you to customise the pump's operating periods
4: What can you use the timer function for?
It tells you when to clean the pump
5: How far away from the discharge port of the hot water source should you place the sensor?
Between 0 and 25 centimetres
5: How far away from the discharge port of the hot water source should you place the sensor?
Between 25 and 50 centimetres
5: How far away from the discharge port of the hot water source should you place the sensor?
Between 50 and 75 centimetres
6: On which pipe do you mount the pump?
The supply pipe
6: On which pipe do you mount the pump?
The return pipe
6: On which pipe do you mount the pump?
Either of the above