Question 1 of 8
Intermediate

What is parallel operation?

Question 2 of 8
Intermediate

What is the main disadvantage of over-dimensioning a wastewater pit?

Question 3 of 8
Intermediate

What is the purpose of the start level sensor?

Question 4 of 8
Intermediate

What might be the reason a wastewater pump solution requires a big free passage?

Question 5 of 8
Intermediate

What are the main virtues of the S-tube® impeller?

Question 6 of 8
Intermediate

How far below ground should the manifold – or the discharge pipe – be installed?

Question 7 of 8
Intermediate

What makes the S-tube® impeller virtually clog-free?

Question 8 of 8
Intermediate

Can a sewage pump handle all types of wastewater?

Question 8 of 8
Intermediate

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the Wastewater transport
Sorry. You did not pass the Wastewater transport test this time
Achieved badges:
How would you rate this course?
1: What is parallel operation?
When two or more pump stations are operating at the same time.
You can find the answer here >
1: What is parallel operation?
When two or more pumps operate side by side simultaneously.
1: What is parallel operation?
When one pump is pumping into another pump and they are operating at the same time.
You can find the answer here >
2: What is the main disadvantage of over-dimensioning a wastewater pit?
Unnecessary investment in the larger civil work.
You can find the answer here >
2: What is the main disadvantage of over-dimensioning a wastewater pit?
Too big distance between the pumps with two or more pumps installed.
You can find the answer here >
2: What is the main disadvantage of over-dimensioning a wastewater pit?
The wastewater stays in the pit too long, which leads to sedimentation.
3: What is the purpose of the start level sensor?
It will send an alarm when the water reaches this level and the pump do not start.
3: What is the purpose of the start level sensor?
It will stop the pump when the water level is lowered to below this level after a pump start.
3: What is the purpose of the start level sensor?
It activates the pump when the water reaches this level.
4: What might be the reason a wastewater pump solution requires a big free passage?
The big free passage will eliminate blocking of impeller.
You can find the answer here >
4: What might be the reason a wastewater pump solution requires a big free passage?
The need for high flow and/or a high content of solids.
4: What might be the reason a wastewater pump solution requires a big free passage?
With the big free passage the pump can also pump wastewater contaminated with sand and gravel.
You can find the answer here >
5: What are the main virtues of the S-tube® impeller?
It offers both excellent efficiency and large free passage.
5: What are the main virtues of the S-tube® impeller?
The S-tube® impeller is available in both cast iron and stainless steel.
You can find the answer here >
5: What are the main virtues of the S-tube® impeller?
The S-tube® impeller do not generate vibrations resulting in longer lifetime on shaft seals and bearings.
You can find the answer here >
6: How far below ground should the manifold – or the discharge pipe – be installed?
It depends on local regulation but typically 1 meter down.
6: How far below ground should the manifold – or the discharge pipe – be installed?
Deep enough not to be damaged by roots from trees and bushes.
6: How far below ground should the manifold – or the discharge pipe – be installed?
Not deeper than gravity to the recipient can be established with a gradient of 1 cm per meter. (0.032 ft per 3.28 ft).
7: What makes the S-tube® impeller virtually clog-free?
The excellent hydraulic efficiency and free passage.
7: What makes the S-tube® impeller virtually clog-free?
The big free passage up t0 160 mm (6.3”).
You can find the answer here >
7: What makes the S-tube® impeller virtually clog-free?
The S-tube® impeller has either a SmartTrim function or a replaceable neck ring to secure the right impeller clearance.
You can find the answer here >
8: Can a sewage pump handle all types of wastewater?
Yes if the pH value is within 4 – 9 and max. dry content 3 to 5%.
8: Can a sewage pump handle all types of wastewater?
Yes with solids up to 100 mm (4”) and max. dry content 3 to 5%.
You can find the answer here >
8: Can a sewage pump handle all types of wastewater?
Yes if gravels and stones are max 100 mm (4”).
You can find the answer here >