Question 1 of 4
Intermediate

What is a decoupler also known as?

Question 2 of 4
Intermediate

What happens to the return air temperature when the heat load at the end of the day decreases?

Question 3 of 4
Intermediate

What defines the constant primary and variable secondary circulation system?

Question 4 of 4
Intermediate

Why is low Delta T a serious problem for a typical pumping scheme?

Question 4 of 4
Intermediate

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 97 - Pumping schemes in chilled water systems
Sorry. You did not pass the 97 - Pumping schemes in chilled water systems test this time
Achieved badges:
How would you rate this course?
1: What is a decoupler also known as?
A differential pressure sensor
You can find the answer here >
1: What is a decoupler also known as?
A neutral bridge
1: What is a decoupler also known as?
2: What happens to the return air temperature when the heat load at the end of the day decreases?
The return air temperature increases
2: What happens to the return air temperature when the heat load at the end of the day decreases?
The return air temperature also decreases
You can find the answer here >
2: What happens to the return air temperature when the heat load at the end of the day decreases?
The return air temperature remains the same, but the supply temperature increases.
You can find the answer here >
3: What defines the constant primary and variable secondary circulation system?
The secondary pump only uses the required energy to meet the system demand.
3: What defines the constant primary and variable secondary circulation system?
The secondary pump kicks in if the primary pump breaks down
You can find the answer here >
3: What defines the constant primary and variable secondary circulation system?
It's an all-in-one system that requires no accessories
You can find the answer here >
4: Why is low Delta T a serious problem for a typical pumping scheme?
It results in heavy wear and tear of the valves
You can find the answer here >
4: Why is low Delta T a serious problem for a typical pumping scheme?
It reduces the installed chiller capacity at the plant
4: Why is low Delta T a serious problem for a typical pumping scheme?
It causes the system to break down, because of a safety measure
You can find the answer here >