- Grundfos Ghana
- Learn
- Ecademy
- All courses
- 30 - System optimisation in...
- Test your knowledge
Question 1 of 6
Advanced
How often does a feed valve require maintenance in a typical boiler system?
Question 2 of 6
Advanced
How much can be saved by using a system with direct temperature control?
Question 3 of 6
Advanced
According to Europump, how much energy can potentially be optimised in better system control and design?
Question 4 of 6
Advanced
What can you increase the speed to when applying a Grundfos CRE3 pump?
Question 5 of 6
Advanced
What do Wash & Clean production facilities consider very important?
Question 6 of 6
Advanced
What is the estimated payback time when replacing fixed speed pumps with variable speed
Question 6 of 6
Advanced
Happy with your answers?
Submit your current answers and get the final test result.
Test results
Congratulations. You have passed the test and completed the 30 - System optimisation in industrial applications
Sorry. You did not pass the 30 - System optimisation in industrial applications test this time
Achieved badges:
How would you rate this course?
1: How often does a feed valve require maintenance in a typical boiler system?
At least once every 3 months
You can find the answer here >
1: How often does a feed valve require maintenance in a typical boiler system?
At least once every 6 months
You can find the answer here >
1: How often does a feed valve require maintenance in a typical boiler system?
At least once every 12 months
2: How much can be saved by using a system with direct temperature control?
Up to 65%
You can find the answer here >
2: How much can be saved by using a system with direct temperature control?
Up to 70%
2: How much can be saved by using a system with direct temperature control?
Up to 75%
You can find the answer here >
3: According to Europump, how much energy can potentially be optimised in better system control and design?
3: According to Europump, how much energy can potentially be optimised in better system control and design?
30%
3: According to Europump, how much energy can potentially be optimised in better system control and design?
4: What can you increase the speed to when applying a Grundfos CRE3 pump?
4800 RPM
You can find the answer here >
4: What can you increase the speed to when applying a Grundfos CRE3 pump?
5500 RPM
You can find the answer here >
4: What can you increase the speed to when applying a Grundfos CRE3 pump?
5800 RPM
5: What do Wash & Clean production facilities consider very important?
That the pumps are compact
5: What do Wash & Clean production facilities consider very important?
That the pumps are energy-efficient
You can find the answer here >
5: What do Wash & Clean production facilities consider very important?
Both of the above
You can find the answer here >
6: What is the estimated payback time when replacing fixed speed pumps with variable speed
Two months
6: What is the estimated payback time when replacing fixed speed pumps with variable speed
Three months
You can find the answer here >
6: What is the estimated payback time when replacing fixed speed pumps with variable speed
Four months
You can find the answer here >