Question 1 of 6
Basic

Is it possible to set up MAGNA3 solely via the pump display?

Question 2 of 6
Basic

MAGNA3 can handle temperatures down to…

Question 3 of 6
Basic

What does a yellow indicator in the Grundfos Eye mean?

Question 4 of 6
Basic

What is the FLOWADAPT control mode?

Question 5 of 6
Basic

What does the FLOWADAPT control mode reduce the need for?

Question 6 of 6
Basic

If there is an internal sensor fault in the pump, which arrow do you press?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 60 - The MAGNA3 Circulator Pump Course
Sorry. You did not pass the 60 - The MAGNA3 Circulator Pump Course test this time
Achieved badges:
How would you rate this course?
1: Is it possible to set up MAGNA3 solely via the pump display?
Yes
1: Is it possible to set up MAGNA3 solely via the pump display?
No
You can find the answer here >
2: MAGNA3 can handle temperatures down to…
0 degrees celsius
You can find the answer here >
2: MAGNA3 can handle temperatures down to…
Minus 5 degrees celsius
You can find the answer here >
2: MAGNA3 can handle temperatures down to…
Minus 10 degrees celsius
3: What does a yellow indicator in the Grundfos Eye mean?
The pump has stopped
You can find the answer here >
3: What does a yellow indicator in the Grundfos Eye mean?
The pump has a warning but can continue
3: What does a yellow indicator in the Grundfos Eye mean?
The pump is slightly damaged but it can continue
You can find the answer here >
4: What is the FLOWADAPT control mode?
A control mode in which the pump continuously adapts its performance to varying flow and performance demands
You can find the answer here >
4: What is the FLOWADAPT control mode?
A combination of the AUTOADAPT control mode and the flowlimit control function
4: What is the FLOWADAPT control mode?
A control mode in which the pump automatically sets a proportional pressure curve with a setpoint of 55%
You can find the answer here >
5: What does the FLOWADAPT control mode reduce the need for?
It reduces the need for pump throttling valves
5: What does the FLOWADAPT control mode reduce the need for?
It reduces the need for manual balancing
You can find the answer here >
5: What does the FLOWADAPT control mode reduce the need for?
It reduces the need for maintenance
You can find the answer here >
6: If there is an internal sensor fault in the pump, which arrow do you press?
The top arrow
You can find the answer here >
6: If there is an internal sensor fault in the pump, which arrow do you press?
The right arrow
You can find the answer here >
6: If there is an internal sensor fault in the pump, which arrow do you press?
The left arorw