Question 1 of 6
Basic

Which position must the MAGNA3 pump head always be in?

Question 2 of 6
Basic

What does the Grundfos eye at the top of the pump display?

Question 3 of 6
Basic

How much can MAGNA3 reduce energy consumption by compared to a typical circulator?

Question 4 of 6
Basic

When do you use the constant flow control mode?

Question 5 of 6
Basic

What does a yellow indicator in the Grundfos Eye mean?

Question 6 of 6
Basic

If there is an internal sensor fault in the pump, which arrow do you press?

Question 6 of 6
Basic

Happy with your answers?

Submit your current answers and get the final test result.

Test results

Congratulations. You have passed the test and completed the 60 - The MAGNA3 Circulator Pump Course
Sorry. You did not pass the 60 - The MAGNA3 Circulator Pump Course test this time
Achieved badges:
How would you rate this course?
1: Which position must the MAGNA3 pump head always be in?
The 3 o clock position
1: Which position must the MAGNA3 pump head always be in?
The 6 o clock position
You can find the answer here >
1: Which position must the MAGNA3 pump head always be in?
The 9 o clock position
You can find the answer here >
2: What does the Grundfos eye at the top of the pump display?
The status of the pump
2: What does the Grundfos eye at the top of the pump display?
The direction of the water flow
You can find the answer here >
2: What does the Grundfos eye at the top of the pump display?
Nothing
You can find the answer here >
3: How much can MAGNA3 reduce energy consumption by compared to a typical circulator?
70%
You can find the answer here >
3: How much can MAGNA3 reduce energy consumption by compared to a typical circulator?
75%
3: How much can MAGNA3 reduce energy consumption by compared to a typical circulator?
80%
You can find the answer here >
4: When do you use the constant flow control mode?
In systems that demand constant flow independent of pressure losses
4: When do you use the constant flow control mode?
In commercial buildings and small family homes
You can find the answer here >
4: When do you use the constant flow control mode?
Nowhere - it's a made-up control mode
You can find the answer here >
5: What does a yellow indicator in the Grundfos Eye mean?
The pump has stopped
You can find the answer here >
5: What does a yellow indicator in the Grundfos Eye mean?
The pump has a warning but can continue
5: What does a yellow indicator in the Grundfos Eye mean?
The pump is slightly damaged but it can continue
You can find the answer here >
6: If there is an internal sensor fault in the pump, which arrow do you press?
The top arrow
You can find the answer here >
6: If there is an internal sensor fault in the pump, which arrow do you press?
The right arrow
You can find the answer here >
6: If there is an internal sensor fault in the pump, which arrow do you press?
The left arorw