8 questions Intermediate

ECADEMY test

18 - Wastewater transport

This course test contains 8 questions and can be retaken at any time.

You must answer all questions correctly to pass the test and complete the course.

Start test

Question 8 of 8 Intermediate

Happy with your answers?

Submit your current answers and get the final test result.

Submit

Test results

Congratulations. You have passed the test and completed the 18 - Wastewater transport

Achieved badges:

Continue training Go to MyECADEMY

Sorry. You did not pass the 18 - Wastewater transport test this time

Correct
Q: What makes the S-tube® impeller virtually clog-free?
A: The excellent hydraulic efficiency and free passage.
Correct
Q: Can a sewage pump handle all types of wastewater?
A: Yes if the pH value is within 4 – 9 and max. dry content 3 to 5%.
Correct
Q: What is drainage water?
A: Wastewater without toilet waste or impurities like paper, diapers and textile fibres.
Correct
Q: What are the benefits of a pumping station with a separate valve chamber?
A: It allows service and maintenance on the valves to be carried out without human interaction with the pit itself.
Correct
Q: What is one of the main challenges facing utility companies today in relation to transportation of wastewater?
A: Lower water consumption has changed the composition of wastewater, which now has a higher proportion of dry solid content than before.
Correct
Q: What is the purpose of the start level sensor?
A: It activates the pump when the water reaches this level.
Correct
Q: What is the main disadvantage of over-dimensioning a wastewater pit?
A: The wastewater stays in the pit too long, which leads to sedimentation.
Correct
Q: Why is it important that the distance between the start and stop level is not too long?
A: If the distance is too long it reduces the number of cycles, which may cause sedimentation because the water stays in the pit too long.